Do You Need A Special Faucet For An Undermount Sink?

What kind of faucet do I need for an undermount sink?

Your faucet may need one, two or three holes, depending on the style.

Single-handle faucets frequently require only a single hole, while bridge-style faucets require two holes, and traditional double-handle faucets often call for three..

Which is better undermount or Overmount sink?

There are many aspects of a kitchen sink to consider, such as size, depth, dividers, and materials. … While undermount sinks are currently preferred for looks, overmount can be a better investment in longevity for certain countertop materials like wood.

Can you replace a sink in a granite countertop?

Sinks for granite countertops can be installed in one of two ways: top-mount or undermount. These terms refer to how the sink attaches to the granite itself. Top-mount sinks are inserted from above and have flanges around the rim of the sink that keep it from falling through the hole cut in the granite.

Are undermount sinks better?

An undermount sink typically costs more than a traditional, drop-in sink. … However, in undermount kitchen sinks, countertop edges get wet easier. If your countertops are made from a solid surface or stone, such as granite or quartz, you’re in luck — those work well with undermount sinks.

Do undermount sinks have faucet holes?

Undermount sinks do not come with predrilled holes. They are installed below the countertop (unlike top-mounted sinks, which sit on top the counter). With undermount sinks, the faucet and accessories are installed directly on the countertop.

Can you convert an Overmount sink to an undermount?

Replacing an overmount sink with an undermount sink will hide the sink lip underneath a countertop and provide clean, modern lines. … Replacement steps involve disconnecting plumbing, removal of the old overmount sink, installing the new sink and reconnecting the plumbing.

Do you have to use an undermount sink with granite?

All of the sinks that we carry in-house are undermount, and that is generally what we recommend for granite or marble countertops. … A drop-in sink, conversely, is set down into the countertop with its rim over the edge of the granite.

How do you support an undermount sink?

Undermount sinks are typically attached with a two-part epoxy adhesive and sealed with silicone caulking around the perimeter. Make sure to get a professional or someone who knows what they’re doing. Most professionals can install an undermount kitchen sink in 30 minutes or less.

How much space should be between backsplash and faucet?

from the back edge of the faucet where it meets the countertop, about 3/4″. From the center of the faucet hole, about 2″. That gives the handle about 1/4″ of clearance from the backsplash in the full hot position.

How far back should faucet be from sink?

2½ inchesSince faucet holes are generally cored 2¼ to 2½ inches from the inside edge of the sink the water stream from a faucet with a wide reach will likely fall in front of the drain rather than in the center which might result in water splashing out of shallow bowls like those of a prep sink.

What kind of sink goes with granite countertops?

Stainless steel sinksStainless steel sinks are by far the most used sinks with granite and quartz kitchen countertops. They are a complimentary match to most faucets, they do not rust, chip, or stain, and they are easy to clean and maintain.

Do tall faucets splash more?

In general, the taller the faucet, the greater chance of splashing particularly when you’re washing vegetables or your hands, Smith confirmed, because this usually takes place in the working space above the sink rim. … “If you have a very shallow sink you don’t want a high arching spout with a 9 to 10-inch height to it.”