Quick Answer: How Do I Change A Faucet Cartridge?

How do you reverse a faucet cartridge?

Grasp the cartridge by the stem and remove it from the faucet valve body by pulling upward with a gentle rocking motion.

Rotate the cartridge 180 degrees.

Align the two tabs on the side of the cartridge with the slots cut into the lip of the valve body.

Insert the cartridge back into the valve body..

How much does it cost to replace a faucet cartridge?

While you can replace a plumbing cartridge yourself, you should have a professional plumber help you. The cost will depend on several factors, but the average labor cost is between $100-250 to replace a shower cartridge. For the cartridge material alone, it can cost anywhere between $30-$100 depending on the brand.

How do I identify my faucet cartridge?

If you cannot locate any markings on the faucet, you can start disassembling it; start with the handle. You’ll be able to measure the cartridge (stem) length of the faucet or resort to the number of splines.

Can a handyman change a faucet?

Handymen in some states are prohibited by law from performing plumbing tasks — other than minor jobs such as installing a new faucet fixture. The main reason for this prohibition is that an amateur, incorrect, or shoddy plumbing job by someone who is not a professional plumber can be disastrous for your home.

How long does it take to replace a faucet?

Replacing a leaky or outdated faucet isn’t as difficult as you might think. You can tackle the project with a basin wrench and a few other common tools. It should usually take no more than about an hour. The same steps apply if you’re installing a new faucet onto a new sink.

How do you remove a single handle faucet cartridge?

cartridgesStep 1: TURN OFF WATER “Step 2: PRY OFF HANDLE “Step 3: REMOVE HANDLE FROM ASSEMBLY “Step 4: REMOVE THE RETAINING NUT “Step 5: REMOVE THE RETAINING CLIP “Step 6: REMOVE THE O-RING “Step 7: REPLACE THE CARTRIDGE “Step 8: REINSTALL THE O-RING ”

Are faucet cartridges universal?

Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.

How do I know what shower cartridge I need?

Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.

How long do faucet cartridges last?

20 to 30 yearsThe valves are easy to move against pressure, and maintain their position easily. You can even leave them set to the same temperature setting and control the volume from off to full on. The system has expensive cartridges, they cost about $30 (2014) to replace, but they last a long time — 20 to 30 years.

Why do faucet cartridges fail?

A malfunctioning faucet can allow water of each kind to enter the pipes of the other. Usually, cartridge faucet woes mean that the rubber O rings inside the faucet have worn out, or that passages within the cartridge have become clogged. … In both cases, open the faucet to be repaired and let remaining water drain out.

Do you need a plumber to replace a faucet?

Faucets have a big impact on the look and feel of our kitchens and bathrooms — and swapping one out by yourself is easier than you might think.

Where do I find my faucet model number?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”